Plan the footprint
Select one of the listed system sizes based on the production plan, available space, transport, and crew workflow.
On-set workflow
Set up. Inflate. Reset.
The Davis Stunt Systems workflow is built around connected bag modules and a handheld blower, so crews can prepare the selected footprint and reset equipment between takes.
Typical product workflow
Four steps between load-in and reset
Connect the modules
Arrange and connect the bags to create the selected three-bag or six-bag footprint.
Inflate each bag
Use a handheld blower to inflate each individual bag. Average inflation time is about 30 seconds per bag.
Reset between takes
Once inflated, the system does not require a continuously running blower. Deflate with the handheld blower and reposition as the production moves.
Inflation timing is approximate. This overview does not replace product instructions, production procedures, or direction from qualified stunt and safety professionals.
Explore the product
Review sizes before planning your setup
Compare the 8′ × 15′ × 3′, 10′ × 15′ × 3′, 16′ × 15′ × 3′, and 20′ × 15′ × 3′ footprints on the systems page.
Compare system footprints